PFK-100B美国Prostat静电场计套件快速报价

PFK-100B Electrostatic Field Meter Kit

MEASURE FIELDS AND VOLTAGE GENERATION AND BALANCE IONIZERS

Measure range & polarity of electrostatic fields in 1 volt or 10 volts increments

Charges from zero to over 1000 volts in less than 5 seconds

Balance Ionizers per ANSI/ESD SP3.3 Periodic Verification

Measure Ionizer Decay time as per ANSI/ESD S3.1 and ANSI/ESD SP3.3.

Measure Body Voltage Generation and Decay

Use with a datalogger to record measurements & create reports

Compatible with the Autoanalysis System

Accuracy of ± 5%

Battery Operated

Uses a Chopper-Stabilized Sensor
The PFM-711B is an accurate, portable electrostatic field measuring device that is easy to use and designed for one hand operation. The PFM-711B is a digital, electronic chopper design, which allows the instrument to make electrostatic field measurements in areas where ionized air is present. Used by itself, the PFM-711B will measure electrostatic fields emanating from virtually any flat surface or object.

Measure in 1 Volt and 10 Volt Increments
The PFM-711B uses a dual range for measuring surface voltage and electrostatic potentials in both positive and negative polarity charges. In the kV/Inch range, the PFM-711B will indicate electrostatic field voltage from 0 to ±20,000 volts in 10 volt increments at 1" (25mm) distance from the charged surface. In the V/Inch range, the field meter measures field density from 0 to ±1,999 volts in 1 volt increments at 1" (25mm) distance from the charged surface. The instrument is easy to use and its controls are designed for one hand operation.

Provides a Ground Reference
The PFM-711B Fieldmeter case is conductive. It provides the ground reference for its measuring circuit. For accurate measurements, it is necessary that the person holding the meter be properly grounded, or the meter has a ground connection made to the 10 mm snap fastener mounted on back of case. Ground the case by wearing a functional wrist strap that is properly grounded. Turn the meter on and select the desired range. Adjust the display to zero (0) volts by pressing the ZERO control.

Bulls Eye for Accurate Measurements
The ranging lights help position the instrument for accurate measurements. Align the front sensor of the PFM-711B Field Meter approximately 1" (25mm) from the surface or object being measured. Move the instrument toward, or away from the surface until the ranging lights are focused on the test surface. Once the field meter is properly positioned, the PFM-711B will indicate the electrostatic field measured on its display.

Use it with a Recording Device
The PFM-711B is the most flexible field meter in the ESD control marketplace. Combined with a variety of accessories, it can perform many different measurements to analyze the static sensitive process or environment.The analog output allows documentation of measurements when used in conjunction with X-Y plotter, analog data recording device, or the Prostat PGA-710B Autoanalysis System. (Recording device and cable not included.)

Long Lasting Battery
The PFM-711B uses a 9 volt alkaline battery (included), which provides an approximate life of 30 hours. The display is designed to indicate when the battery is low. The low battery indicator is conveniently programmed to come in at 7.2 DC volts, which is the minimum voltage required for accurate measurements.

Portable Charge Plate Monitor
The CPM-720B Charge Plate Assembly is a 3.25" x 3.25" isolated plate attachment for the PFM-711B Electrostatic Field Meter. It converts the PFM-711B Field Meter into a portable, battery operated charged plate monitor. By attaching a CPM-720B Charge Plate to the PFM-711B, the meter can also be used for Ion Balance voltage measurements.

Charge It Up!
The PCS-730B can be used to place a ±1000V charge on the CPM-720B Charge Plate making it possible to also measure the discharge times of air ionization equipment per ANSI/ESD SP3.3 Periodic Verification of Air Ionizers.

使用斩波稳定传感器

PFM-711B是一款的便携式静电场测量设备，易于使用，专为单手操作设计。PFM-711B是一种数字电子斩波器设计，允许仪器在存在电离空气的区域进行静电场测量。PFM-711B可以自行测量几乎任何平面或物体发出的静电场。

以1伏和10伏为增量进行测量

PFM-711B使用双量程测量正负极性电荷的表面电压和静电电势。在千伏/英寸范围内，PFM-711B将在距带电表面1英寸（25mm）距离处以10伏增量显示0至±20000伏的静电场电压。在千伏/英寸范围内，场计在距带电表面1英寸（25mm）距离处以1伏增量测量0至±1999伏的场密度。该仪器易于使用，其控制装置设计为单手操作。

提供地面参考

PFM-711B现场仪表外壳是导电的。它为其测量电路提供接地参考。为了进行测量，必须将持表人员正确接地，或者将仪表与安装在外壳背面的10 mm卡扣进行接地连接。通过佩戴正确接地的功能腕带将外壳接地。打开仪表并选择所需的范围。按下零点控制按钮，将显示屏调整为零（0）伏。

准确测量的靶心

测距灯有助于定位仪器以进行测量。将PFM-711B磁场计的前传感器与被测表面或物体的距离对准约1英寸（25毫米）。将仪器移向或远离表面，直到测距灯聚焦在测试表面上。一旦磁场计正确定位，PFM-711B将在其显示器上指示测得的静电场。

与录音设备一起使用

PFM-711B是ESD控制市场中很灵活的现场仪表。结合各种附件，它可以执行多种不同的测量，以分析静电敏感过程或环境。当与X-Y绘图仪、模拟数据记录设备或Prostat PGA-710B自动分析系统结合使用时，模拟输出允许记录测量结果。（不包括录音设备和电缆。）

长效电池

PFM-711B使用9伏碱性电池（包括），其使用寿命约为30小时。显示屏设计用于指示电池电量不足的时间。电池电量不足指示灯可以方便地编程设定为7.2直流电压，这是测量所需的极低电压。

便携式充电板监测器

CPM-720B充电板组件是PFM-711B静电场计的3.25英寸x 3.25英寸隔离板附件。它将PFM-711B现场仪表转换为便携式、电池供电的充电板监测器。通过将CPM-720B充电板连接到PFM-711B，该仪表还可用于离子平衡电压测量。

加油！

PCS-730B可用于在CPM-720B充电板上施加±1000V的电荷，从而可以根据ANSI/ESD SP3测量空气电离设备的放电时间。3空气电离器的定期验证。