685B0001A30（685B0011A13）振动传感器美国PCB家喻户晓
85B0011A13
电子振动开关，内部电感耦合等离子体，0-1.5英寸/秒测量范围，24伏直流电源，双C型继电器，标准外壳，单1/2“NPT开口
685B系列电子振动开关，带内部传感器，0-1.5 ips标度因数，24 VDC供电，5A来自C继电器（SPTT），单端口，带1/2“NPT导管毂。
此型号是685BXX型号的预配置库存版本。有关完整的685BXX配置选项，请参阅产品手册第18-19页的配置表，该配置表位于“手册”选项卡下。
测量范围：0至1.5 in/sec pk（0至38.1 mm/s pk）
电缆输入：单1/2英寸。NPT导管毂
继电器：10A，245伏交流电/30伏直流电，C型
所需功率：24伏直流电+/-10%
电气接头：螺纹端子
| Performance | |||
| Measurement Range | 0 to 1.5 in/sec pk | 0 to 38.1 mm/s pk | |
| Frequency Range (±3 dB) | 120 to 60000 cpm | 2 to 1000 Hz | [1] |
| Power On Delay | 20 sec | 20 sec | [2] |
| Relay (Alert) | 10 A, 245 VAC/30 VDC, Form C | 10 A, 245 VAC/30 VDC, Form C | |
| Relay (Alarm) | 10 A, 245 VAC/30 VDC, Form C | 10 A, 245 VAC/30 VDC, Form C | |
| Relay(Contacts) | Latching / Non-Latching | Latching / Non-Latching | |
| Relay(Contacts) | Normally Open / Closed | Normally Open / Closed | |
| Alarm Setpoint | 10 to of Vibration Range | 10 to of Vibration Range | |
| Alert Setpoint | 10 to of Alarm Setpoint | 10 to of Alarm Setpoint | |
| Delay (Alert) | 0 to 45 sec | 0 to 45 sec | |
| Delay (Alarm) | 0 to 45 sec | 0 to 45 sec | |
| Acceleration Output (±10 %) | 100 mV/g | 10.2 mV/(m/s²) | |
685B0001A30
Electronic vibration switch, internal ICP®, 0-1.5 ips, AC powered, 10A form C relays, BNC acceleration output, dual cord grips
685B series electronic vibration switch with internal sensor, 0-1.5 ips scale factor, 85-245 Vac power, 5A from C relays (SPDT), external BNC connection for raw vibration output, and dual 1/2" NPT conduit hubs.
This model is a pre-configured stock version of Model 685BXX. For the full 685BXX configuration options, reference the configuration table on pages 18-19 of the Product Manual, which is available under the Manual tab.
Measurement Range: 0 to 1.5 in/sec pk (0 to 38.1 mm/s pk)
Cable Input: Dual Cord Grips
Relay: 10 A, 245 VAC/30 VDC, Form C
Power Required: 85-245 VAC 50/60 Hz
Electrical Connector: Screw Terminals
| Control Interface | |||
| Power LED | Green | Green | |
| Alarm LED | Red | Red | |
| Alert LED | Yellow | Yellow | |
| Time Delay Adjustment | Single Turn Potentiometer | Single Turn Potentiometer | |
| Reset Function | Momentary Pushbutton Switch | Momentary Pushbutton Switch | [3] |
| Self Test Function | Momentary Pushbutton Switch | Momentary Pushbutton Switch | |
| Environmental | |||
| Temperature Range (Operating) | -22 to 158 °F | -30 to 70 °C | |
| Temperature Range (Storage) | -40 to 257 °F | -40 to 125 °C | |
| Enclosure Rating | Nema 4X | IP66 | |
| Electrical | |||
| Power Required | 85-245 VAC 50/60 Hz | 85-245 VAC 50/60 Hz | |
| Current Consumption | <150 mA | <150 mA | |
| Output Current | 4 to 20 mA | 4 to 20 mA | [4] |
| External Calibration Input | 4 to 20 mA | 4 to 20 mA | [5] |
| Physical | |||
| Size - Width | 3.5 in | 90 mm | |
| Size - Height | 2.8 in | 70 mm | |
| Size - Depth | 3.5 in | 90 mm | |
| Weight | 1.85 lb | 839 gm | |
| Mounting Torque (Cover Screw) | 4.1 ft-lb | 5.7 Nm | |
| Mounting Torque (Base) | 2 to 5 ft-lb | 3 to 7 Nm | |
| Sensing Element (Internal) | 100 mV/g ICP" Accelerometer | 100 mV/g ICP" Accelerometer | |
| Housing Material | Aluminum Alloy | Aluminum Alloy | |
| Electrical Connector | Screw Terminals | Screw Terminals | |
| Enclosure | Internal and Remote Reset | Internal and Remote Reset | |
| Enclosure | Buffered Acceleration Signal through External BNC (100 mV/g) | Buffered Acceleration Signal through External BNC (100 mV/g) | |
| Screw Terminal Wire Size | 24-14 AWG | 0.2 - 2.5 mm² | |
| Cable Input | Dual Cord Grips | Dual Cord Grips | |
| Mounting Hole Size | 0.21 in | 5.4 mm | |
我们的地址：上海市金山区吕巷镇干巷荣昌路318号3幢1018室
电话：021-59112701
联系手机： 期待您的咨询
