上海持承自动化设备有限公司
变频器 , 纠偏 , 触摸屏 , PLC , 伺服 , 限位开关 , 传感器 , 编码器等
482C05美国PCB供电电源在线报价

482C05美国PCB供电电源在线报价

PCB传感器的应用及其特点现象
PCB传感器的应用
 · 燃烧研究
 · 爆炸零件测试(如:雷管、爆炸螺栓)
  . 安全气囊测试
  . 爆炸冲击波检测
PCB传感器有很快的、微小级的响应及很宽的幅值和频率范围。这些特点使其适用于高频率的应用条件, 其中微型传感器的尺寸也是重要的因素。
PCB传感器特点
  · 石英元件的快速上升时间到微秒
  · 高频共振注500 kHz
  · 频率制定输出,无其他大多数传感器"振铃"
PCB传感器现象
  · 内部加速度传感器补偿以zui大限度的减小冲击和振动灵敏度。

Platinum Stock Products; 4-channel, line-powered, ICP® sensor signal cond., unity gain, BNC input/output conn.

DC Power:  <0.25 Amps

3417929927.jpg

 English:SI: 
Performance
Channels44
Sensor Input Type(s)ICP®ICP®
Output Range (Maximum)±10 V±10 V
Low Frequency Response (-5 %)<0.1 Hz<0.1 Hz[1][2] 
High Frequency Response (-5 %)>1000 kHz>1000 kHz
Phase Response (at 1 kHz)±1 °±1 °
Cross Talk (maximum)-72 dB-72 dB
Fault/Bias  Monitor/Meter (LED)Open/Short/OverloadOpen/Short/Overload
Environmental
Temperature Range (Operating)+32 to +120 °F0 to +50 °C
Electrical
Power Required (for supplied AC power adaptor)AC PowerAC Power
Power Required (direct input to unit)DC PowerDC Power
AC Power (47 to 63 Hz)100 to 240 VAC100 to 240 VAC
AC Power≤0.7 Amps≤0.7 Amps
DC Power<0.25 Amps<0.25 Amps
DC Power+32 to 38 VDC+32 to 38 VDC
Excitation Voltage (±1 VDC) (To Sensor)+26 VDC+26 VDC
DC Offset<20 mV<20 mV
Constant Current Excitation (To Sensor)2 to 20 mA2 to 20 mA[4] 
Discharge Time Constant (0 to 50 %)>5 sec>5 sec[1][2] 
Broadband Electrical Noise (1 to 10000 Hz)3.5 µV rms3.5 µV rms[3] 
Spectral Noise (1 Hz)1.30 µV/√Hz1.30 µV/√Hz[3] 
Spectral Noise (10 Hz)0.10 µV/√Hz0.10 µV/√Hz[3] 
Spectral Noise (100 Hz)0.08 µV/√Hz0.08 µV/√Hz[3] 
Spectral Noise (1 kHz)0.07 µV/√Hz0.07 µV/√Hz[3] 
Spectral Noise (10 kHz)0.07 µV/√Hz0.07 µV/√Hz[3] 
Overload Threshold (±1.0 Vpk)±10 Vpk±10 Vpk
Physical
Electrical Connector (ICP® Sensor Input)BNC JackBNC Jack
Electrical Connector (Output)BNC JackBNC Jack
Electrical Connector (DC Power Input)5-socket DIN (female)5-socket DIN (female)
Size - Height3.2 in8.1 cm
Size - Width8.0 in20 cm
Size - Depth5.9 in15 cm
Weight1.25 lb567 gm

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] With >= 1M ohm input impedance of readout device.
[2] Un-buffered output, read out device input impedance affects discharge time constant and low frequency response of unit.
[3] Typical.
[4] User adjustable, factory set at 4 mA (± 0.5 mA).  One control adjusts all channels.
[5] See PCB Declaration of Conformance PS024 for details.

Accessories:

Supplied
017AXXPower Cord(1)
488B04/NCPower Convertor(1)

3423378296.jpg

我公司主要经营变频器,纠偏,触摸屏,PLC,伺服,限位开关,传感器,编码器等

展开全文
拨打电话 QQ咨询 发送询价