483C05(410C01)美国PCB电源工艺严格
483C05(410C01)美国PCB电源工艺严格
Model: 483C05
8通道,线路供电,电感耦合等离子体传感器信号条件,单位增益,BNC输入/输出连接,机架安装
传感器输入类型:电感耦合等离子体
频道:8个
所需功率:交流电源
Performance | |||
Channels | 8 | 8 | |
Sensor Input Type(s) | ICP® | ICP® | |
Output Range (Maximum) | ±10 V | ±10 V | |
Low Frequency Response (-5 %) | <0.1 Hz | <0.1 Hz | [1][2] |
High Frequency Response (-5 %) | >1000 kHz | >1000 kHz | |
Phase Response (at 1 kHz) | ±1 ° | ±1 ° | |
Cross Talk (maximum) | -72 dB | -72 dB | |
Fault/Bias Monitor/Meter (LED) | Open/Short/Overload | Open/Short/Overload | |
Environmental | |||
Temperature Range (Operating) | +32 to +122 °F | 0 to +50 °C | |
Electrical | |||
Power Required | AC Power | AC Power | |
AC Power (47 to 63 Hz) | 100 to 240 VAC | 100 to 240 VAC | |
AC Power | ≤0.7 Amps | ≤0.7 Amps | |
Excitation Voltage (±1 VDC) (To Sensor) | +26 VDC | +26 VDC | |
DC Offset | <20 mV | <20 mV | |
Constant Current Excitation (To Sensor) | 0 to 20 mA | 0 to 20 mA | [4] |
Discharge Time Constant (0 to 50 %) | >5 sec | >5 sec | [1][2] |
Broadband Electrical Noise (1 to 10000 Hz) | 3.5 µV rms | 3.5 µV rms | [3] |
Spectral Noise (1 Hz) | 1.30 µV/√Hz | 1.30 µV/√Hz | [3] |
Spectral Noise (10 Hz) | 0.10 µV/√Hz | 0.10 µV/√Hz | [3] |
Spectral Noise (100 Hz) | 0.08 µV/√Hz | 0.08 µV/√Hz | [3] |
Spectral Noise (1 kHz) | 0.07 µV/√Hz | 0.07 µV/√Hz | [3] |
Spectral Noise (10 kHz) | 0.07 µV/√Hz | 0.07 µV/√Hz | [3] |
Overload Threshold (±1.0 Vpk) | ±10 Vpk | ±10 Vpk | |
Physical | |||
Electrical Connector (ICP® Sensor Input) | BNC Jack | BNC Jack | |
Electrical Connector (Output) | BNC Jack | BNC Jack | |
Electrical Connector (AC Power Input) | IEC 320 | IEC 320 | |
Size - Height (nominal ) | 1.75 in | 44.5. mm | |
Size - Width (nominal ) | 19 in | 482.6 mm | |
Size - Depth (nominal ) | 13.7 in | 348 mm | |
Weight | 6.25 lb | 2.83 kg |
Model: 410C01
电感耦合等离子体传感器信号条件,35mm导轨安装,峰值轨道保持和波形模拟输出,AC/DC耦合,增益,设置可通过USB或以太网通信配置。
Performance | |||
Channels | 1 | 1 | |
Sensor Input Type(s) | ICP® | ICP® | |
Voltage Gain (+/-10%)Software Selectable ) | X1 X2 X4 X8 X10 X16 X20 | X1 X2 X4 X8 X10 X16 X20 | |
Output Range (Digital ) (Peak Hold) | 0 to 10 V | 0 to 10 V | |
Output Range (Analog Signal) | ±10 V | ±10 V | |
Low Frequency Response (+/-10 %) (AC mode) | 0.5 Hz | 0.5 Hz | |
Low Frequency Response (DC mode) | Governed by Sensor DTC | Governed by Sensor DTC | |
High Frequency Response (+/-5% ) | 10 kHz | 10 kHz | |
Control Interface | |||
Digital Control Interface | USB, Ethernet | USB, Ethernet | |
Human Interface | Downloadable Software Configurator | Downloadable Software Configurator | |
Display | None | None | |
Environmental | |||
Temperature Range | 60 to 110 °F | 15 to 45 °C | |
Electrical | |||
DC Power (±10 %) | 24 VDC | 24 VDC | |
DC Power (Maximum ) | 200 mA | 200 mA | |
Excitation Voltage (To Sensor) | 20 VDC | 20 VDC | [1] |
DC Offset (After reset) | ≤50 mV | ≤50 mV | |
Constant Current Excitation (To Sensor) | 4 mA | 4 mA | [1] |
Discharge Time Constant | 1 sec | 1 sec | [1] |
Broadband Electrical Noise (1 to 10 kHz) (Gain x1) | 200 µV rms | 200 µV rms | [1] |
Input (Reset) | Optically Isolated | Optically Isolated | |
Polarity (Tension/Compression) | Software Selectable | Software Selectable | |
Physical | |||
Electrical Connector (ICP® Sensor Input) | BNC Jack | BNC Jack | |
Electrical Connector (Peak Analog Output) | Screw Terminal | Screw Terminal | |
Electrical Connector (Wave Form Analog Output) | Screw Terminal | Screw Terminal | |
Electrical Connector (Analog Output Common) | Screw Terminal | Screw Terminal | [2] |
Electrical Connector (Ethernet) | RJ45 | RJ45 | |
Electrical Connector (Input Reset) | Screw Terminal | Screw Terminal | |
Electrical Connector (USB Interface) | Type B | Type B | |
Mounting | DIN Rail | DIN Rail | |
Size - Height | 3.9 in | 99 mm | |
Size - Width | 1.78 in | 45.2 mm | |
Size - Length | 4.46 in | 113.3 mm | |
Weight | 0.46 lb | 208 gm |
我公司主要经营变频器,纠偏,触摸屏,PLC,伺服,限位开关,传感器,编码器等
展开全文
相关产品