483C28(483C30)483C50美国PCB电池供电服务与体验
PCB公司的独特优势:
世界上首次一只内装集成电路放大器(ICP®)的压电传感器;
世界上首次一只石英三角剪切加速度传感器(Tri-shear®);
世界上首次一套套力锤(Modally Tuned®),获“美国当年100种重要技术产品之一”的IR-100奖;
世界上首次一只ICP®压电应变传感器®世界上首次只ICP®三向力传感器;
超强的设计能力,可以根据用户需要定制产品;
超强的制造能力(所有传感器部件在公司内部生产)。
PCB公司各部门
振动部:振动、冲击、噪声传感器及相关标定装置;
压力部:动态压电、静态压阻式压力传感器及相关标定装置;
工业传感器部:工业压力、振动、速度传感器及相关仪表;
力/转矩部:压电式力、应变式载荷力和转速、扭矩传感器及相关仪表。
483C28:8通道,线路供电,桥接/差分/ICP®传感器信号条件,增量增益,自动调零,以太网频率范围:(-5%)0.05至50000赫兹
Performance | |||
Channels | 8 | 8 | |
Sensor Input Type(s) | ICP®, Voltage, Bridge/Differential | ICP®, Voltage, Bridge/Differential | |
Voltage Gain (ICP/Voltage Mode) | x0.1 to x200 | x0.1 to x200 | |
Voltage Gain (Bridge/Differential Mode) | x0.1 to x2000 | x0.1 to x2000 | |
Accuracy (Gain, x0.1 to x0.4) | ±5 % | ±5 % | |
Accuracy (Gain, x0.5 to x0.99) | ±1 % | ±1 % | |
Accuracy (Gain, x1.0 to x2000) | ±0.5 % | ±0.5 % | |
Accuracy (Excitation) | ±1 % | ±1 % | |
Input Range (Differential) | ±0 to 10 V | ±0 to 10 V | |
Output Range (Minimum) | ±10 V | ±10 V | |
Frequency Range (-5 %) (≥100 Gain) | 0.05 to 50000 Hz | 0.05 to 50000 Hz | [1] |
Frequency Range (-5 %) (x100 Gain) | 0.05 to 100000 Hz | 0.05 to 100000 Hz | [1] |
Phase Response (at 1 kHz) | ±1 ° | ±1 ° | |
Cross Talk (maximum @ 10kHz) | -72 dB | -72 dB | |
Calibration (Shunt) | Internal/External | Internal/External | |
TEDS Sensor Support | Yes | Yes | |
Fault/Bias Monitor/Meter (LED) | Open/Short/Overload | Open/Short/Overload | |
Control Interface | |||
Digital Control Interface | Ethernet | Ethernet | |
Environmental | |||
Temperature Range (Operating) | +32 to +120 °F | 0 to +50 °C | |
Electrical | |||
Power Required (direct input to unit) | AC Power | AC Power | |
AC Power (47 to 63 Hz) | 100 to 240 VAC | 100 to 240 VAC | |
AC Power | ≤0.9 Amps | ≤0.9 Amps | |
Excitation Voltage (To Sensor) | >+24 VDC | >+24 VDC | |
Excitation Voltage (Bridge Input ) (Positive) | +0 to 12 V | +0 to 12 V | [2] |
Excitation Voltage (Bridge Input ) (Negative) | -0 to 12 V | -0 to 12 V | [2][3] |
Input Imbalance Adjustment (Maximum, Gain <10) | ±2 V | ±2 V | |
Input Imbalance Adjustment (Maximum, Gain ≥10) | ±0.2 V | ±0.2 V | |
Common Mode Voltage (Maximum) | ±10 V | ±10 V | |
DC Offset (Stability, Maximum RTI) | 5 µV/°C | 5 µV/°C | |
DC Offset (AC Coupled) | ≤50 mV | ≤50 mV | |
DC Offset (DC Coupled, Gain <100) | <10 mV | <10 mV | |
DC Offset (DC Coupled, Gain ≥100) | <20 mV | <20 mV | |
Current Output (Bridge Input ) (Excitation, Maximum) | 30 mA | 30 mA | |
Constant Current Excitation (To Sensor) | 0 to 20 mA | 0 to 20 mA | |
Output Impedance | ≤50 Ohm | ≤50 Ohm | |
Impedance (Input) | >1 MOhm | >1 MOhm | |
Broadband Electrical Noise (1 to 10000 Hz) (Gain x1) | 50 µV rms | 50 µV rms | [5] |
Spectral Noise (1 Hz ) (Gain x1) | 6.0 µV/√Hz | 6.0 µV/√Hz | [5] |
Spectral Noise (10 Hz ) (Gain x1) | 1.5 µV/√Hz | 1.5 µV/√Hz | [5] |
Spectral Noise (100 Hz ) (Gain x1) | 1.0 µV/√Hz | 1.0 µV/√Hz | [5] |
Spectral Noise (1 kHz ) (Gain x1) | 1.0 µV/√Hz | 1.0 µV/√Hz | [5] |
Spectral Noise (10 kHz ) (Gain x1) | 1.0 µV/√Hz | 1.0 µV/√Hz | [5] |
Broadband Electrical Noise (1 to 10000 Hz) (Gain x10) | 75 µV rms | 75 µV rms | [5] |
Spectral Noise (1 Hz ) (Gain x10) | 20 µV/√Hz | 20 µV/√Hz | [5] |
Spectral Noise (10 Hz ) (Gain x10) | 1.5 µV/√Hz | 1.5 µV/√Hz | [5] |
Spectral Noise (100 Hz ) (Gain x10) | 1.0 µV/√Hz | 1.0 µV/√Hz | [5] |
Spectral Noise (1 kHz ) (Gain x10) | 1.0 µV/√Hz | 1.0 µV/√Hz | [5] |
Spectral Noise (10 kHz ) (Gain x10) | 1.0 µV/√Hz | 1.0 µV/√Hz | [5] |
Broadband Electrical Noise (1 to 10000 Hz) (Gain x100) | 350 µV rms | 350 µV rms | [5] |
Spectral Noise (1 Hz ) (Gain x100) | 140.0 µV/√Hz | 140.0 µV/√Hz | [5] |
Spectral Noise (10 Hz ) (Gain x100) | 14.0 µV/√Hz | 14.0 µV/√Hz | [5] |
Spectral Noise (100 Hz ) (Gain x100) | 8.0 µV/√Hz | 8.0 µV/√Hz | [5] |
Spectral Noise (1 kHz ) (Gain x100) | 4.0 µV/√Hz | 4.0 µV/√Hz | [5] |
Broadband Electrical Noise (1 to 10000 Hz) (Gain x1000) | 3000 µV/rms | 3000 µV/rms | [4] |
Spectral Noise (10 kHz ) (Gain x100) | 4.0 µV/√Hz | 4.0 µV/√Hz | [5] |
Overload Threshold (±0.2 Vpk) | 10 Vpk | 10 Vpk | |
Physical | |||
Electrical Connector (ICP® Sensor Input) | BNC Jack | BNC Jack | |
Electrical Connector (Bridge/Differential) | 8-socket mini DIN | 8-socket mini DIN | |
Electrical Connector (Output) | BNC Jack | BNC Jack | |
Electrical Connector (Ethernet) | RJ-45 | RJ-45 | |
Size - Height (nominal ) | 1.75 in | 44.5 mm | |
Size - Width (nominal ) | 19.0 in | 482.6 mm | |
Size - Depth (nominal ) | 13.7 in | 348 mm | |
Weight | 7.0 lb | 3.18 kg |
483C30:8通道,线路供电,电感耦合等离子体/电荷传感器信号条件,增益,以太网,外部校准,可选输入接地隔离
数据采集系统输出电缆端到端测试的内部校准信号
传感器输入类型:电感耦合等离子体,电压,电荷
频道:8个
电压增益:x0.1至x200
TEDS传感器支持:是
所需功率:交流电源
483C50:8通道,线路供电,电感耦合等离子体传感器信号条件,x0.1至x200增益,TEDS,以太网
传感器输入类型:电感耦合等离子体®电压
频道:8个
电压增益:x0.1至x200
TEDS传感器支持:是
所需功率:交流电源
PCB公司产品应用特点
量程宽;频响高(谐振频率Zui高大于1500KHz)上升时间快(微秒级)温度宽;坚固、耐用;尺寸小;灵敏度高;过载能力强;品种全:零频响应电容型、模态结构测试型、单轴、三轴等;温度不敏感;稳定等。
我们的地址:上海市金山区吕巷镇干巷荣昌路318号3幢1018室
电话:021-59112701
联系手机: 期待您的咨询