356B41传感器原始出厂价

Triaxial ICP® seat pad accel., 100 mV/g, 0.5 to 1000 Hz, 5-ft integral cable, conforms to ISO 10326-1

Sensitivity: (±10%) 100 mV/g (10.2 mV/(m/s²))

Measurement Range: ±10 g pk (±98 m/s² pk)

Electrical Connector: Integral Cable

 English:SI: PERFORMANCESensitivity (±10 %)100 mV/g10.2 mV/(m/s²)
Measurement Range±10 g pk±98 m/s² pk
Frequency Range (±5 %)0.5 to 1000 Hz0.5 to 1000 Hz[3] Resonant Frequency≥27 kHz≥27 kHz
Broadband Resolution (1 to 10000 Hz)0.0002 g rms0.002 m/s² rms[2] Non-Linearity≤1 %≤1 %[1] Transverse Sensitivity≤5 %≤5 %
ENVIRONMENTALOverload Limit (Shock)±2000 g pk±19620 m/s² pk
Temperature Range-10 to 122 °F-23 to 50 °C
Temperature Response<0.10 %/°F<0.17 %/°C[2] ELECTRICALExcitation Voltage6.5 to 30 VDC6.5 to 30 VDC
Constant Current Excitation0.3 to 10 mA0.3 to 10 mA
Output Impedance≤500 Ohm≤500 Ohm
Output Bias Voltage2.8 to 4.5 VDC2.8 to 4.5 VDC
Discharge Time Constant1 to 3 sec1 to 3 sec
Settling Time (within 10% of bias)<20 sec<20 sec
Spectral Noise (1 Hz)50 µg/√Hz490 (µm/sec2)/√Hz[2] Spectral Noise (10 Hz)10 µg/√Hz98 (µm/sec2)/√Hz[2] Spectral Noise (100 Hz)4 µg/√Hz39 (µm/sec2)/√Hz[2] Spectral Noise (1 kHz)2 µg/√Hz20 (µm/sec2)/√Hz[2] PHYSICALSensing ElementCeramicCeramic
Sensing GeometryShearShear
Housing MaterialTitaniumTitanium
SealingHermeticHermetic
Size - Diameter7.87 in200 mm
Size - Width0.472 in12 mm
Weight9.6 oz272 gm[2] Electrical ConnectorIntegral CableIntegral Cable
Electrical Connection PositionSideSide
Cable Termination1/4-28 4-Pin Jack1/4-28 4-Pin Jack
Cable Length5 ft1.5 m
Cable Type010 4-cond Shielded010 4-cond Shielded
Mounting Thread5-40 Female5-40 Female

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Standard calibration to 100 Hz with sensor in mounting pad. Special calibration above 100 Hz available with sensor outside mounting pad.
[4] See PCB Declaration of Conformance PS023 for details.

Accessories:

Supplied010G05Cable(1)
081A90Mounting stud, 10-32 to 5-40(1)
ACS-17NIST Traceable amplitude and phase response calibration from 0.5 to 100 Hz.(1)

Optional Versions:

No optional versions