685B1001A30(685B0001C14)美国PCB振动开关传感器客户的口碑
685B1001A30(685B0001C14)美国PCB振动开关传感器客户的口碑
685B1001A30
电子振动开关,外部电感耦合等离子体,0-1.5IPS,交流供电,10A C型继电器,外部BNC,双线夹接口
685B系列电子振动开关,带外部传感器(未提供),0-1.5IPS比例因数,85-245伏交流电,10A C型继电器,双线夹连接接口。
此型号是685BXX型号的预配置库存版本。有关完整的685BXX配置选项,请参阅产品手册第18-19页的配置表,该配置表位于“手册”选项卡下。
测量范围:0至1.5 in/sec pk(0至38.1 mm/s pk)
电缆输入:双线夹
继电器:10A,245伏交流电/30伏直流电,C型
所需功率:85-245伏交流电50/60赫兹
电气接头:螺纹端子
Performance | |||
Measurement Range | 0 to 1.5 in/sec pk | 0 to 38.1 mm/s pk | |
Frequency Range (±3 dB) | 120 to 60000 cpm | 2 to 1000 Hz | [1] |
Power On Delay | 20 sec | 20 sec | [2] |
Relay (Alert) | 10 A, 245 VAC/30 VDC, Form C | 10 A, 245 VAC/30 VDC, Form C | |
Relay (Alarm) | 10 A, 245 VAC/30 VDC, Form C | 10 A, 245 VAC/30 VDC, Form C | |
Relay(Contacts) | Latching / Non-Latching | Latching / Non-Latching | |
Relay(Contacts) | Normally Open / Closed | Normally Open / Closed | |
Alarm Setpoint | 10 to of Vibration Range | 10 to of Vibration Range | |
Alert Setpoint | 10 to of Alarm Setpoint | 10 to of Alarm Setpoint | |
Delay (Alert) | 0 to 45 sec | 0 to 45 sec | |
Delay (Alarm) | 0 to 45 sec | 0 to 45 sec | |
Acceleration Output (±10 %) | 100 mV/g | 10.2 mV/(m/s²) | |
Control Interface | |||
Power LED | Green | Green | |
Alarm LED | Red | Red | |
Alert LED | Yellow | Yellow | |
Time Delay Adjustment | Single Turn Potentiometer | Single Turn Potentiometer | |
Reset Function | Momentary Pushbutton Switch | Momentary Pushbutton Switch | [3] |
Self Test Function | Momentary Pushbutton Switch | Momentary Pushbutton Switch | |
Environmental | |||
Temperature Range (Operating) | -22 to 158 °F | -30 to 70 °C | |
Temperature Range (Storage) | -40 to 257 °F | -40 to 125 °C | |
Enclosure Rating | Nema 4X | IP66 | |
Electrical | |||
Power Required | 85-245 VAC 50/60 Hz | 85-245 VAC 50/60 Hz | |
Current Consumption | <150 mA | <150 mA | |
Output Current | 4 to 20 mA | 4 to 20 mA | [4] |
External Calibration Input | 4 to 20 mA | 4 to 20 mA | [5] |
Physical | |||
Size - Width | 3.5 in | 90 mm | |
Size - Height | 2.8 in | 70 mm | |
Size - Depth | 3.5 in | 90 mm | |
Weight | 1.85 lb | 839 gm | |
Mounting Torque (Cover Screw) | 4.1 ft-lb | 5.7 Nm | |
Mounting Torque (Base) | 2 to 5 ft-lb | 3 to 7 Nm | |
Sensing Element (External) | 100 mV/g ICP" Accelerometer | 100 mV/g ICP" Accelerometer | |
Housing Material | Aluminum Alloy | Aluminum Alloy | |
Electrical Connector | Screw Terminals | Screw Terminals | |
Enclosure | Internal and Remote Reset | Internal and Remote Reset | |
Enclosure | Buffered Acceleration Signal through External BNC (100 mV/g) | Buffered Acceleration Signal through External BNC (100 mV/g) | |
Screw Terminal Wire Size | 24-14 AWG | 0.2 - 2.5 mm² | |
Cable Input | Dual Cord Grips | Dual Cord Grips | |
Mounting Hole Size | 0.21 in | 5.4 mm |
Product Notes
[1] To obtain 60000 cpm (1000 Hz) frequency response, grease must be applied to all mechanical couplings. Otherwise, frequency response is limited to approximately 30000 cpm (500 Hz)
[2] Factory Set
[3] Reset can also be engaged via external connection to common
[4] Current will fluctuate at frequencies below 5 Hz.
[5] Active only during calibration mode
[6] See PCB Declaration of Conformance PS051 for details.
我公司主要经营变频器,纠偏,触摸屏,PLC,伺服,限位开关,传感器,编码器等